Alpha Communications STR QwikBus Manuale Utente Pagina 15

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 23
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 14
13
The Matrix – Wiring Pushbuttons to the TT33
Modular Button Assy.
Close up of TT33 Matrix Connections
The matrix consists of Common Connections a,b,c, & d and numbers 1 through 6.
Apartment Connections
101 A 1
102 A 2
103 A 3
104 A 4
201 A 5
202 A 6
203 B 1
204 B 2
301 B 3
302 B 4
303 B 5
304 B 6
PH1 C 1
PH2 C 2
PH3 C 3
# of Apartments
Additional
Components
1 – 23 ---
24 – 55 E56
56 – 87 E88
88 – 119 E120
For systems larger than 119 apartments, contact Alpha Communications for assistance.
When using an STR Modular Button assembly, the system can read
which switch is being pressed by electronics built into the switches.
In the case of a Custom Panel, these electronics are built into the
TT33 and you must run wires to assign each button to a position in a
matrix.
The chart to the left shows an example of how a 15 button
panel could be connected using combinations of letters and
numbers to give each button a unique identification in the
electronic matrix.
As long as each button is connected to a unique combination
of one letter and one number then the system will be able to
assign addresses to each button.
Using the matrix on the TT33 module, you can get 4x6 (24)
unique combinations. One of these combinations (D6) is
reserved for special functions, so you can have up to a total of
23 apartments using the TT33 alone. If your system has more
apartments you may add the following parts (one for each
entry) which will extend the matrix by giving you more numeric
connections. Please refer to the chart below.
Vedere la pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Commenti su questo manuale

Nessun commento